ISO 10017:2003, Guidance on statistical techniques for ISO 9001:2000 (ISO 9001:2000 統計技術指導綱要)
ISO/TR 13425:1995 (ed1.0), Guide for the selection of statistical methods in standardization and specification (withdrawn and replaced by ISO/TR 13425:2003)
ISO/TR 13425:2003 (ed2.0), Guidelines for the selection of statistical methods in standardization and specification (withdrawn and replaced by ISO/TR 13425:2006)
ISO/TR 13425:2006 (ed3.0), Guidelines for the selection of statistical methods in standardization and specification (2011年撤銷)
ISO/TR 13519:2012 (ed1.0), Guidance on the development and use of ISO statistical publications spported by software
ISO/TR 18532:2009 (ed1.0), Guidance on the application of statistical methods to quality and to industrial standardization
名詞與定義 (ISO/TC 69/SC 1 Terminology and symbols)：
ISO 3534-1:1993 (ed1.0), Statistics - Vocabulary and symbols - Part 2: Probability and general statistical terms (58 pages) (revised by ISO 3534-1:2006)
ISO 3534-1:2006 (ed2.0), Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability (116 pages)
ISO/NP 3534-1:201x (ed3.0), Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability
ISO 3534-2:1993 (ed1.0), Statistics - Vocabulary and symbols - Part 2: Statistical quality control (44 pages) (revised by ISO 3534-2:2006)
ISO 3534-2:2006 (ed2.0), Statistics - Vocabulary and symbols - Part 2: Applied statistics (134 pages)
ISO 3534-3:1985 (ed1.0), Statistics - Vocabulary and symbols - Part 3: Design of experiments (46 pages) (revised by ISO 3534-3:1999)
ISO 3534-3:1999 (ed2.0), Statistics - Vocabulary and symbols - Part 3: Design of experiments (56 pages) (revised by ISO 3534-3:2013)
ISO 3534-3:2013 (ed3.0), Statistics - Vocabulary and symbols - Part 3: Design of experiments (110 pages)
ISO 3534-4:2014 (ed1.0), Statistics - Vocabulary and symbols - Part 4: Survey sampling (43 pages)
資料統計詮釋與描述： (ISO/TC 69 Applications of statistical methods)
ISO 2602:1980 (ed1.0), Statistical interpretation of test results - Estimation of the mean - Confidence interval (will be replaced by ISO/CD 16295-5:2016)
ISO 2854:1976 (ed1.0), Statistical interpretation of data - Techniques of estimation and tests relating to means and variances (will be replaced by ISO/CD 16295-5:2016)
ISO 3207:1975 (ed1.0), Statistical interpretation of data - Determination of a statistical tolerance interval (replaced by ISO 16269-6:2005)
ISO 3301:1975 (ed1.0), Statistical interpretation of data - Comparison of two means in the case of paired observations (will be replaced by ISO/CD 16295-5:2016)
ISO 3494:1976 (ed1.0), Statistical interpretation of data - Power of tests relating to means and variances (will be replaced by ISO/CD 16295-5:2016)
ISO 5479:1997 (ed1.0), Statistical interpretation of data - Tests for departure from the normal distribution (will be replaced by ISO/DIS 16269-3:2017)
ISO 11453:1996 (ed1.0), Statistical interpretation of data - Tests and confidence intervals relating to proportions (will be replaced by ISO/DIS 16269-2:2017)
ISO/DIS 16269-2:2017 (ed1.0), Statistical interpretation of data - Part 2: Tests and confidence intervals relating to proportions
ISO/DIS 16269-3:2017 (ed1.0), Statistical interpretation of data - Part 3: Tests for departure from the normal distribution
ISO 16269-4:2010 (ed10), Statistical interpretation of data - Part 4: Detection and treatment of outliers
ISO/CD 16269-5:2017, Statistical interpretation of data - Part 5: Estimation and tests of means and variances in the normal distribution with power functions for tests
ISO 16269-6:2005 (ed1.0), Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals (revised by ISO 16269-6:2014)
ISO 16269-6:2014 (ed2.0), Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals
ISO 16269-7:2001 (ed1.0), Statistical interpretation of data - Part 7: Median - Estimation and confidence intervals
ISO 16269-8:2004 (ed1.0), Statistical interpretation of data - Part 8: Determination of prediction intervals
ISO 24153:2009 (ed1.0), Random sampling and randomization procedures
ISO 28640:2010 (ed1.0), Random variate generation methods
抽樣與抽樣系統: (ISO/TC 69/SC 5)
ISO/TR 8550:1994 (ed1.0), Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discre items in lots (revised by ISO/TR 8550-1:2007)
ISO/TR 8550-1:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling
ISO/TR 8550-2:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 2: Sampling by attributes
ISO/TR 8550-3:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 3: Sampling by variables
ISO 13448-1:2005 (ed1.0), Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 1: Guidelines for the APP approach (replaced by ISO 28587-1:2017)
ISO 21247:2005 (ed1.0), Combined accept-zero sampling systems and process control procedures for product acceptance (revised by ISO 28594:2017)
ISO 24153:2009 (ed1.0), Random sampling and randomization procedures
ISO 28594:2017 (ed1.0), Combined accept-zero sampling systems and process control procedures for product acceptance
ISO 28598-1:2017 (ed1.0), Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 1: Guidelines for the APP approach
ISO 28598-2:2017 (ed1.0), Acceptance sampling procedure based on the allocation of priorities principle (APP) - Part 2; Coordinated single sampling plans for acceptance sampling by attributes
計數型抽樣計畫：(ISO/TC 69/SC 5 Acceptance Sampling)
ISO 2859-0:1995 (ed1.0), Sampling procedures for inspection by attributes - Part 0: Introduction to the ISO 2859 attribute sampling system (replaceed by ISO 2859-10:2006)
ISO 2859-1:1989 (ed1.0), Sampling procedures for inspection by attributes - Part 1: Sampling plans indexed by acceptance quality level (AQL) for lot-by-lot inspection (revised by ISO 2859-1:1999)
ISO 2859-1:1999 (ed2.0), Sampling procedures for inspection by attributes - Part 1: Smapling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 2859-2:1985 (ed1.0), Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
ISO/AWI 2859-2:2015 (ed2.0), Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
ISO 2859-3:1991 (ed1.0), Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (revised by ISO 2859-3:2005)
ISO 2859-3:2005 (ed2.0), Sampling procedures for inspection by attributes - Part 3: Skip-log sampling procedures
ISO 2859-4:1999 (ed1.0), Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of stated quality levels (revised by ISO 2859-4:2002)
ISO 2859-4:2002 (ed2.0), Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
ISO/AWI 2859-4:2015 (ed3.0), Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
ISO 2859-5:2005 (ed1.0), Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 2859-10:2006 (ed1.0), Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes (replaced by ISO 28590:2017)
ISO 8422:2006 (ed2.0), Sequential sampling plans for inspection by attributes (replaced by ISO 28591:2017)
ISO/TR 8550-2:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 2: Sampling by attributes
ISO 13448-2:2004 (ed1.0), Acceptance sampling procedures based on the allocation of priorities principles (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by atributes (revised by ISO 28498-2:2017)
ISO 14560:2004 (ed1.0), Acceptance sampling procedures by attributes - Specified quality levels in nonconforming item per million (revised by ISO 28597:2017) (= MS ISO 14560:2006)
ISO 18414:2006 (ed1.0), Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality (revised by ISO 28593:2017)
ISO 21247:2005 (ed1.0), Combined accept-zero sampling systems and process control procedures for product acceptance (revised by ISO 28594:2017)
ISO 28590:2017 (ed1.0), Sampling procedures for inspection by attributes - Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
ISO 28591:2017 (ed1.0), Sequential sampling plans for inspection by attributes
ISO 28593:2017 (ed1.0), Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
ISO 28597:2017 (ed1.0), Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
ISO 28598-2:2017 (ed1.0), Acceptance sampling procedures based on the allocation of priorities principles (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attrbutes
計量型抽樣計畫：(ISO/TC 69/SC 5 Acceptance sampling)
ISO 3951-1:2005 (ed1.0), Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (revised by ISO 3951-1:2013)
ISO 3951-1:2013 (ed2.0), Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
ISO 3951-2:2006 (ed1.0), Sampling procedures for inspection by variables - Part 2: General specifications for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics (revised by ISO 3951-2:2013)
ISO 3951-2:2013 (ed2.0), Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
ISO 3951-3:2007 (ed1.0), Sampling procedures for inspection by variables - Part 3: Specification for double sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
ISO 3951-4:2011 (ed1.0), Sampling procedures for inspection by variables - Part 4: Sequential sampling plans for inspection by variables - Known standard deviation
ISO 3951-5:2006, Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (Known standard deviation)
ISO 8422:2006, Sequential sampling plans for inspection by attributes
ISO 8423:2008, Sequential sampling plans for inspection by attributes for percent nonconforming (known standard deviation)
ISO/TR 8550-3:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling sysems for inspection of discrete items in lots - Part 3: Sampling by variables
散裝物料 (bulk materials) 抽樣計畫：(ISO/TC 69/SC 6 Measurement methods and results)
ISO 10725:2000 (ed1.0), Acceptance sampling plans and procedures for the inspection of bulk materials
ISO 11648-1:2003 (ed1.0), Statistical aspects of sampling from bulk materials - Part 1: General principles
控制圖(或管制圖) (ISO/TC 69/SC 4 Applications of statistical methods in product and process management)：
ISO 7870:1993 (ed1.0), Control charts - General guide and introduction (withdrawn and revised by ISO 7870-1:2007 on 2007-12-05)
ISO 7870-1:2007 (ed1.0), Control charts - Part 1: General guidelines (withdrawn and revised by ISO 7870-1:2014 on 2014-01-22)
ISO 7870-1:2014 (ed2.0), Control charts - Part 1: General guidelines
ISO/DIS 7870-1:2016 (ed3.0), Control charts - Part 1: General guidelines (under development)
ISO 7870-2:2013 (ed1.0), Control charts - Part 2: Shewhart control charts
ISO 7870-3:2012 (ed1.0), Control charts - Part 3: Acceptance control charts
ISO 7870-4:2011 (ed1.0), Control charts - Part 4: Cumulative sum charts
ISO 7870-5:2014 (ed1.0), Control charts - Part 5: Specialized control charts
ISO 7870-6:2016 (ed1.0), Control charts - Part 6: EWMA control charts
ISO/CD 7870-7:2016 (ed1.0), Control charts - Part 7: Multivariate control charts (under development)
ISO 7870-8:2017 (ed1.0), Control charts - Part 8: Charting techniques for short runs and small mixed batches
ISO/CD 7870-9:2017 (ed1.0), Control charts - Part 9: Control charts for autocorrelated processes
ISO/TR 7871:1997 (ed1.0), Cumulative sum charts - Guidance on quality control and data analysis using CUSUM techniques (replaced by ISO 7870-4:2011)
ISO 7873:1993 (ed1.0), Control charts for arithmetic with warning limits (withdrawn on 2014-12-10)
ISO 7966:1993 (ed1.0), Acceptance control charts (replaced by ISO 7870-3:2012)
ISO 8258:1991 (ed1.0), Shewhart control charts (replaced by ISO 7870-2:2013)
統計過程控制 (SPC) (ISO/TC 69/SC 4 Applications of statistical methods in product and process management)
ISO 11462-1:2001 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 1: Elements of SPC
ISO 11462-2:2010 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 2: Catalogue of tools and techniques
ISO/DTR 11462-3:2017 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 3: Reference data set for SPC software validation
ISO/NP TR 11462-4:2017 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 4: Reference data sets for measurement process analysis software validation
ISO/NP TR 11462-5:2017 (ed1.0), Guidelines for implementation of statatical process control (SPC) - Part 5: Quality data exchange format for SPC software
過程管理統計方法 - 能力與績效 (Capability and performance) (ISO/TC 69/SC 4)
ISO 21747:2006 (ed1.0), Statistical methods - Process performance and capability statistics for measured quality characteristics (revised by ISO 22514-2:2013)
ISO 22514-1:2009 (ed1.0), Statistical methods in process management - Capability and performance - Part 1: General principles and concepts (revised by ISO 22514-1:2014)
ISO 22514-1:2014 (ed2.0), Statistical methods in process management - Capability and performance - Part 1: General principles and concepts
ISO 22514-2:2013 (ed1.0), Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-dependent process models (revised by ISO 22514-2:2017)
ISO 22514-2:2017 (ed2.0), Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-dependent process models
ISO 22514-3:2008 (ed1.0), Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
ISO/CD 22514-3:2017, Statistical methods in process measurement - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
ISO/TR 22514-4:2007 (ed1.0), Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures (replaced by ISO 22514-4:2016)
ISO 22514-4:2016 (ed1.0), Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures
ISO/DIS 22514-5:2015 (ed1.0), Statistical methods in process management - Capability and performance - Part 5: Process capability estimates and performance for atributive characteristics
ISO 22514-6:2013 (ed1.0), Statistical methods in process management - Capability and performance - Part 6: Process capability statistics for characteristics following a multivariate normal distribution
ISO 22514-7:2012 (ed1.0), Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes
ISO 22514-8:2014 (ed1.0), Statistical methods in process management - Capability and performance - Part 8: Machine performance of a multi-state production process
ISO/CD TR 22514-9 (ed1.0), Statistical methods in process management - Capability and performance - Part 9: Process capability statistics for characterisitics defined by geoetrical specification (GPS)
六西格瑪 (six sigma) (ISO/TC 69/SC 7)
ISO 13053-1:2011 (ed1.0), Quantitative methods in process improvement - Six sigma - Part 1: DMAIC mehtodology
ISO 13053-2:2011 (ed1.0), Quantitative methods in process improvement - Six sigma - Part 2: Tools and techniques
ISO/TR 13195:2015 (ed1.0), Selected illustrations of response surface method - Central composite design
ISO/TR 14468:2010 (ed1.0), Selected illustrations of attribute agreement analysis
ISO/TR 16705:2016 (ed1.0), Statistical methods for implementation of Six Sigma - Selected illustrations of contingency table analysis
ISO 17258:2015 (ed1.0), Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organizations
ISO 18404:2015 (ed1.0), Quantitative methods in process improvement - Six sigma - Cometencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
ISO/CD 20575-1:2016 (ed1.0), Statistical and probabilistic methods in the development of products, processes and services - Design for Six Sigma - Part 1: DfSS Framework
ISO/AWI TR 20693:2015 (ed1.0), Statistical methods for implementation of Six Sigma - Selected illustrations of distribution identification studies
實驗設計 (DOE) (ISO/TC 69/SC 1 + ISO/TC 69/SC 7)
ISO 3534-3:2013 (ed3.0), Statistics - Vocabulary and symbols - Part 3: Design of experiments
ISO/TR 12845:2010 (ed1.0), Selected illustrations of fractional factorial screening experiment
ISO/TR 29901:2007 (ed1.0), Selected illustrations of full factorial experiments with four factors
新技術與產品開發過程 (ISO/TC 69/SC 8 Application of statistical and related methodology for new technology and product development)
ISO 16336:2014 (ed1.0), Application of statistical and related methods to new technology and product development process - Rubust paramter design (RPD)
ISO/AWI 16337:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Robust Tolerance Design (RTD)
ISO 16355-1:2015 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 1: Genernal principle and perspective of QFD method
ISO 16355-2:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 2: Acquisition of Non-quantitative VOC or VOS
ISO/DIS 16355-3:2018 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 3: Acquisition of Non-quantitative and quantitative VOC/VOS
ISO 16355-4:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 4: Analysis of non-quantitative and quantitative VOC/VOS
ISO 16355-5:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 5: Solution strategy
ISO/AWI TR 16355-6:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 6: Optimization - Robust parameter design
ISO 16355-7, Application of statistical and related methods to new technology and product development process - Part 7: Optimization - Tolerance design and output to manufacturing (proposal withdrawl and use ISO 16337)
ISO/TR 16355-8:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 8: Guidelines for commercialization and life cycle
量測方法與結果及偵測能力 (ISO/TC 69/SC 6 Measurement methods and results)
ISO 5725:1986 (ed1.0), Precision of test methods - Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests (replaced by ISO 5725-1:1994, ISO 5724-2:1994, ISO 5725-3:1994, ISO 5725-4:1994, ISO 5725-5:1998, and ISO 5725-6:1994)
ISO 5725-1:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and resultsl - Part 1: General principles and definitions (will be revised by ISO/AWI 5725-1:2015)
ISO/AWI 5725-1:2015 (ed2.0), Accuracy (trueness and precision) of measurement methods and resultls - Part 1: General principles and definitions
ISO 5725-2:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and results) - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (will be revised by ISO/AWI 5725-2:2015 (ed2.0))
ISO/AWI 5725-2:2015 (ed2.0), Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method)
ISO 5725-3:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
ISO 5725-4:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (will be revised by ISO/CD 5725-4:2016 (ed2.0))
ISO/CD 5725-4:2016 (ed2.0), Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 5725-5:1998 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO 5725-6:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
ISO 10576-1:2003 (ed1.0), Statistical methods - Guidelines for the evaluation of conformity with specified requirements - Part 1: General principles
ISO 11095:1996 (ed1.0), Linear calibration using reference materials
ISO 11843-1:1997 (ed1.0), Capability of detection - Part 1: Terms and definitions
ISO 11843-3:2003 (ed1.0), Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
ISO 11843-4:2003 (ed1.0), Capability 0f detection - Part 4: Methodology for comparing the minimum detectable value with a given value
ISO 11843-5:2008 (ed1.0), Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
ISO 11843-6:2013 (ed1.0), Capability of detection - Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
ISO 11843-7:2012 (ed1.0), Capability of detection - Part 7: Methodology based on stochastic properties of insturmental noise
ISO/TR 12888:2011 (ed1.0), Selected illustrations of gauge repeatability and reproducibility studies
ISO/TR 13195:2015 (ed1.0), Selected illustrations of response surface method - Central composite design
ISO 13528:2005 (ed1.0), Statistical methods for use in proficiency testing by interlaboratory comparison (revised by ISO 13528:2015)
ISO 13528:2015 (ed2.0), Statistical methods for use in proficiency testing by interlaboratory comparison
ISO/TR 13587:2012 (ed1.0), Three statistical approaches for the assessment and interpretation of measurement uncertainty
ISO/TR 14468:2010 (ed1.0), Selected illustrations of attribute agreement analysis
ISO/TS 17503:2015 (ed1.0), Statistical methods of uncertainty evaluation - Guidance on evaluation of uncertainty using two-factor crossing designs
ISO 21748:2010 (ed1.0), Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation (revised by ISO 21748:2017)
ISO 21748:2017 (ed2.0), Guidance for the use of repeatability, reporducibility and trueness estimates in measurement uncertainty evaluation
ISO/TS 21749:2005 (ed1.0), Measurement uncertainty for metrological applications - Repeated measurements and nested experiments
ISO/TR 22971:2005 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementating and statistically analysing interlaboratory repeatability and reproducibility results
ISO/TS 28037:2010 (ed1.0), Determination and use of straight-line calibration functions
ISO/DTS 28038:2017 (ed1.0), Determination and use of polynomial calibration functions
時間變化 (Follow in Time)：可靠度 (reliability) 與演變 (evolution)
IEC 60410:1973, Sampling plans and procedures for inspection by attributes
IEC 60605-4:2001, Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
IEC 60605-6:2007, Equipment reliability testing - Part 6: Tests for the validity and estimation of constant failure rate and constant failure intensity
IEC 60706-6-9:1994, Guide on maintainability of equipment - Part 6: Section 9: Statistical methods in maintainability evaluation (withdrawn and replaced by IEC 60706-3:2006)
IEC 61070:1991, Compliance test procedures for steady-state availability
IEC 61123:1991, Reliability testing - Compliance test plans for success ratio
IEC 61164:2004, Reliabilitiy growth - Statistical test and estimation mehtods
IEC 61649:2008, Weibull analysis
IEC 61710:2000, Power law model - Goodness-of-fit tests and estimation methods