BS 2564:1955, Control chart technique when manufacturing to a specification, with special reference to articles machnies to dimensional tolerances
ANSI/ASQC B1:1958, Guide for quality control charts
ANSI/ASQC B2:1958, Control chart methods of analyzing data
ANSI/ASQC B3:1958, Control chart method for controlling quality during production
CNS 2312:1965，分析數據用的管制圖
CNS 2312:1974，分析數據用的管制圖
CNS 10301:1983，個別值與移動全距管制圖 (X Control chart)
BS 5700:1984, Guide to process control using quality control chart methods and cusum techniques
ISO 8258:1991 (ed1.0), Schewhart control charts (withdrawn and revised by ISO 7870-2:2013)
ISO 7870-1993 (ed1.0), Control charts - General guide and introduction (withdrawn on 2007-12-05)
ISO 7966:1993 (ed1.0), Acceptance control charts (withdrawn and revised by ISO 7870-3:2012)
BS 7785:1994, Shewhart control charts
ANSI/ASQC B1:1996, Guide for quality control charts
ANSI/ASQC B2:1996, Control chart methods of analyzing data
ANSI/ASQC B3:1996, Control chart methods of controlling quality during production
GOST R 51814-3:2001, Quality systems for automotive industry - Methods of statistical process control
ISO 11462-1:2001 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 1: Elements of SPC
BS ISO 11452-1:2001, Guidelines for implementation of statistical process control (SPC). Part 1: Element of SPC
BS 5701-2:2001, Guide to statistical process control (SPC) charts for variables - Part 1: Charts for mean, median, range, and standard deviation
BS 5701-1:2003, Guide to quality control and performance improvement using qualitative (attribute) data. Uses and value of attribute charts in business, industry, commernce and public service
BS 5701-2:2003, Guide to quality control and performance improvement using qualitative (attribute) data. Fundamentatls of standard attribute charting for monitoring, control and improvement
BS 5701-3:2003, Guide to quality control and performance improvement using qualitative (attribute) data. Technical aspects of attribute charting. Special situation handling
BS 5701-4:2003, Guide to quality control and performance improvement using qualitative (attribute) data. Attribute inspection performance control and improvement
BS 5703-1:2003, Guide to data analysis and quality control using cusum techniques. Part 1: Uses and value of cusum charts in business, industry, commerces, and public service
BS 5703-2:2003, Guide to data analysis and quality control using cusum techniques. Part 2: Introduction to decision-making using cusum techniques
BS 5703-3:2003, Guide to data analysis and quality control using cusum techniques. Part 3: Cusum methods for process/quality control using measured data
BS 5703-4:2003, Guide to data analysis and quality control using cusum techniques. Part 4: Cusum methods for discrete (count/classified) data
ISO 21747:2006 (ed1.0), Statistical methods - Process performance and capability statistics for measured quality characteristics (withdrawn and replaced by ISO 22514-2:2013)
BS ISO 21747:2006, Statistical methods. Process performance and capability statistics for measured quality characteristics
ISO 7870-1:2007 (ed1.0), Control charts - Part 1: General guidelines (withdrawn on 2014-01-22)
BS ISO 7870-1:2007, Control charts. Part 1: General guidelines
ISO 22514-4:2007, Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures (withdrawn and replaced by ISO 22514-4:2016)
ISO 22514-3:2008 (ed1.0), Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
BS ISO 22514-3:2008, Statistical method in process management - Capability and performance. Part 3: Machine performance studies for measured data on discrete parts
BS 5702-2:2008, Guide to statistical process control (SPC) charts for variables - Part 2: Charts for individual values
BS 5702-3:2008, Guide to statistical process control (SPC) charts for variables - Part 3: Charting techniques for short runs and small mixed batches
ISO 22514-1:2009 (ed1.0), Statistical methods in process management - Capability and performance - Part 1: General principles and concepts
BS ISO 22514-1:2009, Statistical methods in process management. Capability and performance. Part 1: General principles and concepts
ISO 11462-2:2010 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 2: Catelogue of tools and techniques
ISO 7870-4:2011 (ed1.0), Control charts - Part 4: Cumulative sum charts
BS ISO 7870-4:2011, Control charts. Cumulative sum charts
ISO 7870-3:2012 (ed1.0), Control charts - Part 3: Acceptance control charts
ASQ/ANSI/ISO 7870-3:2012, Control charts - Part 3: Acceptance control charts
BS ISO 7870-3:2013, Control charts. Acceptance control charts
ISO 22514-7:2012 (ed1.0), Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes
ISO 7870-2:2013 (ed1.0), Control charts - Part 2: Shewhart control charts
ASQ/ANSI/ISO 7870-2:2013, Control charts - Part 2: Schewhart control charts
BS ISO 7870-2:2013, Control charts - Shewhart control charts
ISO 22514-2:2013 (ed1.0), Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-depedent process models
ISO 22514-6:2013 (ed1.0), Statistical methods in process management - Capability and performance - Part 6: Process capability statistics for characteristics following a multivariate normal distribution
ISO 7870-1:2014 (ed2.0), Control charts - Part 1: General guidelines
ASQ/ANSI/ISO 7870-1:2014, Control charts - Part 1: General guidelines
BS ISO 7870-1:2014, Control charts. General guidelines
ISO 22514-1:2014 (ed2.0), Statistical methods in process management - Capability and performance - Part 1: General principles and concepts
ISO 7870-5:2014 (ed1.0), Control charts - Part 5: Specialized control charts
BS ISO 7879-5:2014, Control charts. Specialized control charts
ISO 22514-8:2014 (ed1.0), Statistical methods in process management - Capability and performance - Part 8: Machine performance of a multi-state production process (37 pages)
BS 5700:2015, Guide to the selection of charting methods and capability assessment for use in statistical process control
ISO 7870-1:2016 (ed3.0-wd), Control charts - Part 1: General guidelines
ISO 7870-6:2016 (ed1.0), Control charts - Part 6: EWMA control charts
BS ISO 7870-6:2016, Control charts - EWMA control charts
ISO 7870-7:2016 (ed1.0-wd), Control charts - Part 7: Multivariate control charts
ISO 7870-8:2016 (ed1.0-dis), Control charts - Part 8: Charting techniques for short runs and small mixed batches
ISO 7870-9:2016 (ed1.0-wd), Control charts - Part 9: Control charts for autocorrelated processes
ISO 11462-3:2016 (ed1.0-dtr), Guidelines for implementation of statistical process control (SPC) - Part 3: SPC on test examples for software validation
ISO 22514-2:2016 (ed2.0-dis), Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-dependent process models
ISO 22514-3:2016 (ed2.0-cd), Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
ISO 22514-4:2016 (ed1.0), Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures
ISO 22514-5:2016 (ed1.0-dis), Statistical methods in process management - Capability and performance - Part 5: Process capability estimates and performance for attributive characteristics
ISO 22514-0:2016 (ed1.0-cd), Statistical methods in process management - Capability and performance - Part 9: Process capability statistics for characteristics defined by geometrical specification
國際標準標準化組織 ISO/TC 69/SC 4 負責國際標準清單詳見 ISO 官網，相關國際標準清單部分截圖如下：
[attach]1536[/attach]